Skip to main content

SubseaSolutions

Call today: 281-398-3317

SubseaSolutionsWaveLogo72

Calendar

January, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 01-08-2019
    Event End Date 01-10-2019

    Invite a Friend!

    Pre-Register

  •  Introduction to Well Intervention Control Systems

    SubseaSolutionsTraining

    A three-day course providing a solid overview of intervention well control components and control systems. Recommended Prerequisite: Subsea 101 / Subsea 102 and / or some electronics-electrical background. This course is designed for oil and gas personnel involved with intervention well control.

    Course includes relevant students’ hands-on in class group exercises and activities.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • Intervention Well Control Manufacturers - OEMs
    • Intervention Well Control Systems Components
    • Intervention Well Control Recommended Procedures
    • Christmas Trees - Vertical and Horizontal
    • BOPs vs. IWCs - Control Systems
    • ROV Tooling

     Training Classes
    Classes are open to current employees of oil and gas companies and drilling contractors and original equipment manufacturers of intervention well control systems. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 01-15-2019
    Event End Date 01-18-2019

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 01-22-2019
    Event End Date 01-24-2019

    Invite a Friend!

    Pre-Register

February, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 02-05-2019
    Event End Date 02-07-2019

    Invite a Friend!

    Pre-Register

  •  Introduction to Well Intervention Control Systems

    SubseaSolutionsTraining

    A three-day course providing a solid overview of intervention well control components and control systems. Recommended Prerequisite: Subsea 101 / Subsea 102 and / or some electronics-electrical background. This course is designed for oil and gas personnel involved with intervention well control.

    Course includes relevant students’ hands-on in class group exercises and activities.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • Intervention Well Control Manufacturers - OEMs
    • Intervention Well Control Systems Components
    • Intervention Well Control Recommended Procedures
    • Christmas Trees - Vertical and Horizontal
    • BOPs vs. IWCs - Control Systems
    • ROV Tooling

     Training Classes
    Classes are open to current employees of oil and gas companies and drilling contractors and original equipment manufacturers of intervention well control systems. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 02-12-2019
    Event End Date 02-14-2019

    Invite a Friend!

    Pre-Register

  • Introduction to Subsea Math and Schematics and Subsea BOP Controls

    SubseaSolutionsTraining

    This is a combined four-day course on subsea math and subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.

    This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.

    Recommended Prerequisites: Subsea 101 for Drilling Contractors and Operators is recommended.

    Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

    The following topics will be covered during the training:

    • Symbols Recognition
    • Understanding and using Test and Measuring Equipment
    • Understanding Hydraulic Valves
    • Schematic Reading & Interpretation
    • Schematic Case Studies - OEMs
    • Conventional Control Systems
    • Multiplex Control Systems
    • Emergency Control Systems
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Risers and Riser Tension Calculations
    An end of course exam administered.

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.

    Training Classes

    Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This course qualifies for our Loyalty Rewards Program.

    Location Houston,Texas
    Event Date 02-19-2019
    Event End Date 02-22-2019

    Invite a Friend!

    Register Now!

March, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 03-05-2019
    Event End Date 03-07-2019

    Invite a Friend!

    Pre-Register

  •  Introduction to Well Intervention Control Systems

    SubseaSolutionsTraining

    A three-day course providing a solid overview of intervention well control components and control systems. Recommended Prerequisite: Subsea 101 / Subsea 102 and / or some electronics-electrical background. This course is designed for oil and gas personnel involved with intervention well control.

    Course includes relevant students’ hands-on in class group exercises and activities.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • Intervention Well Control Manufacturers - OEMs
    • Intervention Well Control Systems Components
    • Intervention Well Control Recommended Procedures
    • Christmas Trees - Vertical and Horizontal
    • BOPs vs. IWCs - Control Systems
    • ROV Tooling

     Training Classes
    Classes are open to current employees of oil and gas companies and drilling contractors and original equipment manufacturers of intervention well control systems. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 03-12-2019
    Event End Date 03-14-2019

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 03-19-2019
    Event End Date 03-21-2019

    Invite a Friend!

    Pre-Register

April, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 04-02-2019
    Event End Date 04-04-2019

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 04-09-2019
    Event End Date 04-11-2019

    Invite a Friend!

    Pre-Register

May, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 05-07-2019
    Event End Date 05-09-2019

    Invite a Friend!

    Pre-Register

  • Introduction to Subsea Math and Schematics and Subsea BOP Controls

    SubseaSolutionsTraining

    This is a combined four-day course on subsea math and subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.

    This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.

    Recommended Prerequisites: Subsea 101 for Drilling Contractors and Operators is recommended.

    Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

    The following topics will be covered during the training:

    • Symbols Recognition
    • Understanding and using Test and Measuring Equipment
    • Understanding Hydraulic Valves
    • Schematic Reading & Interpretation
    • Schematic Case Studies - OEMs
    • Conventional Control Systems
    • Multiplex Control Systems
    • Emergency Control Systems
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Risers and Riser Tension Calculations
    An end of course exam administered.

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.

    Training Classes

    Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This course qualifies for our Loyalty Rewards Program.

    Location Houston,Texas
    Event Date 05-14-2019
    Event End Date 05-17-2019

    Invite a Friend!

    Register Now!

  •  Introduction to Well Intervention Control Systems

    SubseaSolutionsTraining

    A three-day course providing a solid overview of intervention well control components and control systems. Recommended Prerequisite: Subsea 101 / Subsea 102 and / or some electronics-electrical background. This course is designed for oil and gas personnel involved with intervention well control.

    Course includes relevant students’ hands-on in class group exercises and activities.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • Intervention Well Control Manufacturers - OEMs
    • Intervention Well Control Systems Components
    • Intervention Well Control Recommended Procedures
    • Christmas Trees - Vertical and Horizontal
    • BOPs vs. IWCs - Control Systems
    • ROV Tooling

     Training Classes
    Classes are open to current employees of oil and gas companies and drilling contractors and original equipment manufacturers of intervention well control systems. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 05-21-2019
    Event End Date 05-23-2019

    Invite a Friend!

    Pre-Register

June, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 06-04-2019
    Event End Date 06-06-2019

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 06-11-2019
    Event End Date 06-13-2019

    Invite a Friend!

    Pre-Register

July, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 07-09-2019
    Event End Date 07-11-2019

    Invite a Friend!

    Pre-Register

  • Subsea 108 Intervention Well Control


    An in-depth course that provides a thorough overview of intervention well-control equipment, control systems, and associated components. This course is delivered in our state-of-the-art 3D Training Center in Houston.  This course is designed for oil and gas personnel with an interste in learning more about intervention well-control equipment as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders and drilling engineers dealing with Subsea Drilling Operations involving Intervention Well Control. A review of the major OEMs is covered.

    • Objective: To provide a solid overview of IWC components and control systems
    • Duration 24 hours / 3 days
    • Continuing Ed 2.4 CEUs / 24 PDHs

    Topics Include :

    • Introduction to IWC Equipment & Background
    • IWC Architecture
    • IWC Regulations
    • BOPs vs. IWCs
    • Christmas Trees (Vertical & Horizontal)

    Training Classes
    Class Size 12 Students maximum; No Prerequisites. An end of course exam administered.
    Classes are open enrollment and group classes are available.


    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    Location Houston,Texas
    Event Date 07-16-2019
    Event End Date 07-18-2019

    Invite a Friend!

    Register Now!

August, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 08-06-2019
    Event End Date 08-08-2019

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 08-13-2019
    Event End Date 08-15-2019

    Invite a Friend!

    Pre-Register

  • Introduction to Subsea Math and Schematics and Subsea BOP Controls

    SubseaSolutionsTraining

    This is a combined four-day course on subsea math and subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.

    This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.

    Recommended Prerequisites: Subsea 101 for Drilling Contractors and Operators is recommended.

    Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

    The following topics will be covered during the training:

    • Symbols Recognition
    • Understanding and using Test and Measuring Equipment
    • Understanding Hydraulic Valves
    • Schematic Reading & Interpretation
    • Schematic Case Studies - OEMs
    • Conventional Control Systems
    • Multiplex Control Systems
    • Emergency Control Systems
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Risers and Riser Tension Calculations
    An end of course exam administered.

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.

    Training Classes

    Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This course qualifies for our Loyalty Rewards Program.

    Location Houston,Texas
    Event Date 08-20-2019
    Event End Date 08-23-2019

    Invite a Friend!

    Register Now!

September, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 09-10-2019
    Event End Date 09-12-2019

    Invite a Friend!

    Pre-Register

  • Subsea 108 Intervention Well Control


    An in-depth course that provides a thorough overview of intervention well-control equipment, control systems, and associated components. This course is delivered in our state-of-the-art 3D Training Center in Houston.  This course is designed for oil and gas personnel with an interste in learning more about intervention well-control equipment as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders and drilling engineers dealing with Subsea Drilling Operations involving Intervention Well Control. A review of the major OEMs is covered.

    • Objective: To provide a solid overview of IWC components and control systems
    • Duration 24 hours / 3 days
    • Continuing Ed 2.4 CEUs / 24 PDHs

    Topics Include :

    • Introduction to IWC Equipment & Background
    • IWC Architecture
    • IWC Regulations
    • BOPs vs. IWCs
    • Christmas Trees (Vertical & Horizontal)

    Training Classes
    Class Size 12 Students maximum; No Prerequisites. An end of course exam administered.
    Classes are open enrollment and group classes are available.


    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    Location Houston,Texas
    Event Date 09-17-2019
    Event End Date 09-19-2019

    Invite a Friend!

    Register Now!

October, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 10-08-2019
    Event End Date 10-10-2019

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 10-15-2019
    Event End Date 10-17-2019

    Invite a Friend!

    Pre-Register

  • Introduction to Subsea Math and Schematics and Subsea BOP Controls

    SubseaSolutionsTraining

    This is a combined four-day course on subsea math and subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.

    This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.

    Recommended Prerequisites: Subsea 101 for Drilling Contractors and Operators is recommended.

    Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

    The following topics will be covered during the training:

    • Symbols Recognition
    • Understanding and using Test and Measuring Equipment
    • Understanding Hydraulic Valves
    • Schematic Reading & Interpretation
    • Schematic Case Studies - OEMs
    • Conventional Control Systems
    • Multiplex Control Systems
    • Emergency Control Systems
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Risers and Riser Tension Calculations
    An end of course exam administered.

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.

    Training Classes

    Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This course qualifies for our Loyalty Rewards Program.

    Location Houston,Texas
    Event Date 10-22-2019
    Event End Date 10-25-2019

    Invite a Friend!

    Register Now!

November, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 11-05-2019
    Event End Date 11-07-2019

    Invite a Friend!

    Pre-Register

  • Subsea 108 Intervention Well Control


    An in-depth course that provides a thorough overview of intervention well-control equipment, control systems, and associated components. This course is delivered in our state-of-the-art 3D Training Center in Houston.  This course is designed for oil and gas personnel with an interste in learning more about intervention well-control equipment as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders and drilling engineers dealing with Subsea Drilling Operations involving Intervention Well Control. A review of the major OEMs is covered.

    • Objective: To provide a solid overview of IWC components and control systems
    • Duration 24 hours / 3 days
    • Continuing Ed 2.4 CEUs / 24 PDHs

    Topics Include :

    • Introduction to IWC Equipment & Background
    • IWC Architecture
    • IWC Regulations
    • BOPs vs. IWCs
    • Christmas Trees (Vertical & Horizontal)

    Training Classes
    Class Size 12 Students maximum; No Prerequisites. An end of course exam administered.
    Classes are open enrollment and group classes are available.


    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    Location Houston,Texas
    Event Date 11-12-2019
    Event End Date 11-14-2019

    Invite a Friend!

    Register Now!

December, 2019
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 12-10-2019
    Event End Date 12-12-2019

    Invite a Friend!

    Pre-Register

  • Introduction to Subsea Math and Schematics and Subsea BOP Controls

    SubseaSolutionsTraining

    This is a combined four-day course on subsea math and subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.

    This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.

    Recommended Prerequisites: Subsea 101 for Drilling Contractors and Operators is recommended.

    Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

    The following topics will be covered during the training:

    • Symbols Recognition
    • Understanding and using Test and Measuring Equipment
    • Understanding Hydraulic Valves
    • Schematic Reading & Interpretation
    • Schematic Case Studies - OEMs
    • Conventional Control Systems
    • Multiplex Control Systems
    • Emergency Control Systems
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Risers and Riser Tension Calculations
    An end of course exam administered.

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.

    Training Classes

    Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This course qualifies for our Loyalty Rewards Program.

    Location Houston,Texas
    Event Date 12-17-2019
    Event End Date 12-20-2019

    Invite a Friend!

    Register Now!