A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background.

Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background.

Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

Among the topics this course teaches, students will learn:

• The Science of Metrology
• Measurements
• Magnitudes and Quantities
• Measurement Errors
• Calculations
• Student Math Exercises

Target Group: Drilling Managers, Drilling Supervisors, Drilling Engineers, Drilling Superintendent, Ops Support Engineer, OIM, Maintenance Supervisor, Subsea Director, Subsea Supervisors, Subsea Techs, Subsea Trainee.

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies, drilling contractors, and service organizations. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This class qualifies for Loyalty Rewards points and 1.6CEUs and 16 PDHs.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills. This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, maintenance supervisors, electricians, electronic technicians and drilling engineers dealing with subsea drilling operations.

Recommended Prerequisites: Subsea 101 is recommended.

Target Group: Drilling Engineers, Maintenance Supervisors, Subsea Director, Subsea Supervisor, Subsea Techs, Subsea Trainee, Electrician, Subsea Electrician Tech.

Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

The following topics will be covered during the training:

• Symbols Recognition
• Understanding Hydraulic Valves
• Schematic Reading & Interpretation
• Schematic Case Studies - OEMs
• Conventional Control Systems
• Multiplex Control Systems
• Emergency Control Systems

Training Classes

Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

This course qualifies for our Loyalty Rewards Program and 2.4 CEUs / 24 PDHs

A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited
• API Standards and Specifications
• BSEE Regulations

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Subsea Gate Valves: API Test Referencing
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems 

Training Classes

Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background.

Open to Oil and Gas personnel. Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models. T

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited
• API Standards and Specifications
• BSEE Regulations

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Subsea Gate Valves: API Test Referencing
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems 

Training Classes

Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

An in-depth course that provides a thorough overview of intervention well-control equipment, control systems, and associated components. This course is delivered in our state-of-the-art 3D Training Center in Houston.  This course is designed for oil and gas personnel with an interste in learning more about intervention well-control equipment as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders and drilling engineers dealing with Subsea Drilling Operations involving Intervention Well Control. A review of the major OEMs is covered.

• Objective: To provide a solid overview of IWC components and control systems
• Duration 24 hours / 3 days
• Continuing Ed 2.4 CEUs / 24 PDHs

Topics Include :

• Introduction to IWC Equipment & Background
• IWC Architecture
• IWC Regulations
• BOPs vs. IWCs
• Christmas Trees (Vertical & Horizontal)

Training Classes
Class Size 12 Students maximum; No Prerequisites. An end of course exam administered.
Classes are open enrollment and group classes are available.

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designe for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

 Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

Among the topics this course teaches, students will learn:

• The Science of Metrology
• Measurements
• Magnitudes and Quantities
• Measurement Errors
• Calculations
• Student Math Exercises

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies, drilling contractors, and service organizations. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

• Innovative Pioneers in Industry Training

  Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

  • 3D Graphics
  • Animations
  • Physical 3D Models
  • 20’ Cyviz Bizwall

  This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

  This class qualifies for Loyalty Rewards points and 1.6CEUs and 16 PDHs.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills. This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, maintenance supervisors, electricians, electronic technicians and drilling engineers dealing with subsea drilling operations.

Recommended Prerequisites: Subsea 101 is recommended.

Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

The following topics will be covered during the training:

• Symbols Recognition
• Understanding Hydraulic Valves
• Schematic Reading & Interpretation
• Schematic Case Studies - OEMs
• Conventional Control Systems
• Multiplex Control Systems
• Emergency Control Systems

Training Classes

Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

This course qualifies for our Loyalty Rewards Program and 2.4 CEUs / 24 PDHs

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designe for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designe for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

 Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designe for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

 Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills. This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, maintenance supervisors, electricians, electronic technicians and drilling engineers dealing with subsea drilling operations.

Recommended Prerequisites: Subsea 101 is recommended.

Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

The following topics will be covered during the training:

• Symbols Recognition
• Understanding Hydraulic Valves
• Schematic Reading & Interpretation
• Schematic Case Studies - OEMs
• Conventional Control Systems
• Multiplex Control Systems
• Emergency Control Systems

Training Classes

Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

This course qualifies for our Loyalty Rewards Program and 2.4 CEUs / 24 PDHs

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designe for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

 Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designe for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

 Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

 Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.

A one-day course that introduces students to the history of drilling operations and tools used for drillling an oil well. Different types of drilling rigs are covered and students receive a solid overview of blowout preventers, drilling components and control systems. A hands on experience, students have the opportunity to test their knowledge, skills, and abilities by assembling a blowout preventer stack made from our in-house printed 3D models.

Target Audience: This course is ideally suited for anyone entering the oil and gas industry, personnel changing roles or looking to improve their knowledge of well-control equipment.

• IADC Accredited
• Continuing Education Units (CEU)  0.8 / Professional Development Hours (PDH) 8.0

Topics Include and Covers OEMs:

• Introduction to Oil Drilling History
• Anatomy of Drilling Rigs and Type of Rigs
• Mud Flow System Components
• BOP Stack Components
• Connectors
• Ram Type BOPs
• Annular Type BOPs
• Motion Compensation (Covers Wire-line & Inline)
• BOP Control Systems

Training Classes
Classes are IADC accredited and open to anyone interested in expanding their knowledge of subsea well-control equipment. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
• IADC Accredited

Topics Include and Covers OEMs:

• BOP Stack Components
• Connectors
• Ram Type BOPs and their Locking Mechanisms
• Annular Type BOPs
• Motion Compensation(Covers Wire-line & Inline)
• BOP Control Systems
• POD Similarities and Differences

Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training

Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

• Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

Topics Include and Covers Major OEMs:

• BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
• Anatomy of Mux Systems
• Hydraulic Power Package
• MUX Cable and Reels
• Remote Control Panels (NEC, IEC, CENELEC Specifications)
• Programmable Logic Controllers - PLCs

 Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

• 3D Graphics
• Animations
• Physical 3D Models
• 20’ Cyviz Bizwall

This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

This course qualifies for Loyalty Rewards points.