Calendar
-
Subsea 100 Introduction to Well Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.
- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow Systems
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 01-25-2016 Event End Date 01-25-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For personnel with rig experience, both operator and drilling contractor)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 01-26-2016 Event End Date 01-28-2016
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.
- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 02-22-2016 Event End Date 02-22-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 02-23-2016 Event End Date 02-25-2016
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 03-07-2016 Event End Date 03-07-2016 -
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 03-08-2016 Event End Date 03-10-2016 -
Subsea 100 Introduction to Well Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 03-28-2016 Event End Date 03-28-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 03-29-2016 Event End Date 03-31-2016
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 04-11-2016 Event End Date 04-11-2016 -
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 04-12-2016 Event End Date 04-14-2016 -
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is avilable in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 04-25-2016 Event End Date 04-25-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
SUBSEA This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences
between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 04-26-2016 Event End Date 04-28-2016
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is avilable in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 05-09-2016 Event End Date 05-09-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 05-10-2016 Event End Date 05-12-2016 -
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 05-17-2016 Event End Date 05-19-2016
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 06-06-2016 Event End Date 06-06-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 06-07-2016 Event End Date 06-09-2016 -
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 06-14-2016 Event End Date 06-16-2016
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 07-04-2016 Event End Date 07-04-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 07-05-2016 Event End Date 07-07-2016 -
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 07-19-2016 Event End Date 07-21-2016
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 08-01-2016 Event End Date 08-01-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 08-02-2016 Event End Date 08-04-2016 -
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 08-23-2016 Event End Date 08-25-2016 -
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 08-29-2016 Event End Date 08-29-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 08-30-2016 Event End Date 09-01-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 09-13-2016 Event End Date 09-15-2016 -
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 09-26-2016 Event End Date 09-26-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 09-27-2016 Event End Date 09-29-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 10-04-2016 Event End Date 10-06-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 10-18-2016 Event End Date 10-20-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 11-08-2016 Event End Date 11-10-2016 -
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 11-21-2016 Event End Date 11-21-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 11-22-2016 Event End Date 11-24-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 12-06-2016 Event End Date 12-08-2016 -
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 12-12-2016 Event End Date 12-12-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems
This three-day course is an in-depth review of the well-control equipment used on offshore drilling units. It addresses the various equipment manufacturers, differences between their designs and common issues encountered during operation. Extensive use of illustrations, 3D animations and physical models accompanies the presentation. For persons with limited offshore experience, it recommended that Subsea 100 be taken as a prerequisite.- Well-Control Equipment and Subsea Systems (For drilling contractor and operator personnel with rig experience)
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 12-13-2016 Event End Date 12-15-2016