Calendar
-
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.
Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.
- Continuing Education Units (CEU) 2.4 / Professional Development Hours (PDH) 24
- IADC Accredited
- API Standards and Specifications
- BSEE Regulations
Topics Include and Covers OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.Location Houston,Texas Event Date 09-19-2017 Event End Date 09-21-2017 -
Subsea 105 Schematics Reading and Subsea BOP Controls
A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills. This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, maintenance supervisors, electricians, electronic technicians and drilling engineers dealing with subsea drilling operations.
Recommended Prerequisites: Subsea 101 is recommended.
Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.The following topics will be covered during the training:
- Symbols Recognition
- Understanding Hydraulic Valves
- Schematic Reading & Interpretation
- Schematic Case Studies - OEMs
- Conventional Control Systems
- Multiplex Control Systems
- Emergency Control Systems
An end of course exam administered.
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.Training Classes
Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
This course qualifies for our Loyalty Rewards Program and 2.4 CEUs / 24 PDHs
Location Houston,Texas Event Date 09-19-2017 Event End Date 09-21-2017
-
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.
Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.
- Continuing Education Units (CEU) 2.4 / Professional Development Hours (PDH) 24
- IADC Accredited
- API Standards and Specifications
- BSEE Regulations
Topics Include and Covers OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.Location Houston,Texas Event Date 09-19-2017 Event End Date 09-21-2017 -
Subsea 105 Schematics Reading and Subsea BOP Controls
A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills. This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, maintenance supervisors, electricians, electronic technicians and drilling engineers dealing with subsea drilling operations.
Recommended Prerequisites: Subsea 101 is recommended.
Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.The following topics will be covered during the training:
- Symbols Recognition
- Understanding Hydraulic Valves
- Schematic Reading & Interpretation
- Schematic Case Studies - OEMs
- Conventional Control Systems
- Multiplex Control Systems
- Emergency Control Systems
An end of course exam administered.
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.Training Classes
Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
This course qualifies for our Loyalty Rewards Program and 2.4 CEUs / 24 PDHs
Location Houston,Texas Event Date 09-19-2017 Event End Date 09-21-2017
-
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.
Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.
- Continuing Education Units (CEU) 2.4 / Professional Development Hours (PDH) 24
- IADC Accredited
- API Standards and Specifications
- BSEE Regulations
Topics Include and Covers OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.Location Houston,Texas Event Date 09-19-2017 Event End Date 09-21-2017 -
Subsea 105 Schematics Reading and Subsea BOP Controls
A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills. This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, maintenance supervisors, electricians, electronic technicians and drilling engineers dealing with subsea drilling operations.
Recommended Prerequisites: Subsea 101 is recommended.
Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.The following topics will be covered during the training:
- Symbols Recognition
- Understanding Hydraulic Valves
- Schematic Reading & Interpretation
- Schematic Case Studies - OEMs
- Conventional Control Systems
- Multiplex Control Systems
- Emergency Control Systems
An end of course exam administered.
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.Training Classes
Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
This course qualifies for our Loyalty Rewards Program and 2.4 CEUs / 24 PDHs
Location Houston,Texas Event Date 09-19-2017 Event End Date 09-21-2017