Calendar
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 04-11-2016 Event End Date 04-11-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 04-12-2016 Event End Date 04-14-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day IADC-accredited course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to operator personnel,
this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to
promote and enhance the relationship between operators and drilling contractors.
Offered to active personnel of Exploration and Production (Oil and Gas) Companies with a working knowledge of:
- Drilling
- Associated equipment
- Standards and Specifications
- Regulations
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for the Loyalty Rewards Program.
Location Houston,Texas Event Date 04-12-2016 Event End Date 04-14-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 04-12-2016 Event End Date 04-14-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day IADC-accredited course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to operator personnel,
this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to
promote and enhance the relationship between operators and drilling contractors.
Offered to active personnel of Exploration and Production (Oil and Gas) Companies with a working knowledge of:
- Drilling
- Associated equipment
- Standards and Specifications
- Regulations
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for the Loyalty Rewards Program.
Location Houston,Texas Event Date 04-12-2016 Event End Date 04-14-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 04-12-2016 Event End Date 04-14-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day IADC-accredited course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to operator personnel,
this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to
promote and enhance the relationship between operators and drilling contractors.
Offered to active personnel of Exploration and Production (Oil and Gas) Companies with a working knowledge of:
- Drilling
- Associated equipment
- Standards and Specifications
- Regulations
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for the Loyalty Rewards Program.
Location Houston,Texas Event Date 04-12-2016 Event End Date 04-14-2016