Calendar
-
Subsea 100 Introduction to Well-Control Equipment
This one-day course is designed for personnel with little or no prior offshore experience and offers an insight into drilling practices and well-control requirements. It emphasizes the importance of well-control and provides a general overview of the well-control equipment used on offshore drilling platforms. Target audience includes purchasing, office staff, staff engineers, and new subsea technicians.- A Well-Control Equipment Primer for Beginners / Trainees
- This course is available in English and Portuguese
Topics Include and Covers Major OEMs:
- Quick Oil Drilling History
- Anatomy of Drilling Rigs
- Mud Flow System Components
- BOP Stack Components
- Connectors
- Ram Type BOPs
- Annular Type BOPs
- Motion Compensation(Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 03-07-2016 Event End Date 03-07-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 03-08-2016 Event End Date 03-10-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day IADC-accredited course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to operator personnel, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors.
Offered to active personnel of Exploration and Production (Oil and Gas) Companies with a working knowledge of:
- Drilling
- Associated equipment
- Standards and Specifications
- Regulations
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist and Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for our Loyalty Rewards Program.
Location Houston,Texas Event Date 03-08-2016 Event End Date 03-10-2016 -
Subsea 105 Introduction to Schematics Reading and Subsea BOP Controls
A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.
This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.
Prerequisites: SS 101 recommended.
Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.The following topics will be covered during the training:
- Symbols Recognition
- Understanding Hydraulic Valves
- Schematic Reading & Interpretation
- Schematic Case Studies - OEMs
- Conventional Control Systems
- Multiplex Control Systems
- Emergency Control Systems
An end of course exam administered.
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.Training Classes
Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
This course qualifies for our Loyalty Rewards Program.
Location Houston,Texas Event Date 3-08-2016 Event End Date 3-10-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 03-08-2016 Event End Date 03-10-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day IADC-accredited course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to operator personnel, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors.
Offered to active personnel of Exploration and Production (Oil and Gas) Companies with a working knowledge of:
- Drilling
- Associated equipment
- Standards and Specifications
- Regulations
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist and Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for our Loyalty Rewards Program.
Location Houston,Texas Event Date 03-08-2016 Event End Date 03-10-2016 -
Subsea 105 Introduction to Schematics Reading and Subsea BOP Controls
A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.
This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.
Prerequisites: SS 101 recommended.
Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.The following topics will be covered during the training:
- Symbols Recognition
- Understanding Hydraulic Valves
- Schematic Reading & Interpretation
- Schematic Case Studies - OEMs
- Conventional Control Systems
- Multiplex Control Systems
- Emergency Control Systems
An end of course exam administered.
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.Training Classes
Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
This course qualifies for our Loyalty Rewards Program.
Location Houston,Texas Event Date 3-08-2016 Event End Date 3-10-2016
-
BOP MUX CONTROL SYSTEMS for Contractors and Operators
An intensive three-day course providing an in-depth look at the multiplex (MUX) systems used to control the blowout preventer (BOP) on modern offshore drilling rigs. Different equipment manufacturers are presented detailing the differences between their designs. The course is culminated with a hands-on working session preforming realistic system troubleshooting on a MUX system simulator.Open to Operators and Drilling Contractors personnel (Oil and Gas). Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions BOP MUX Simulator.
Topics Include and Covers Major OEMs:
- BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
- Anatomy of Mux Systems
- Hydraulic Power Package
- MUX Cable and Reels
- Remote Control Panels (NEC, IEC, CENELEC Specifications)
- Programmable Logic Controllers - PLCs
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
Location Brasil Event Date 03-08-2016 Event End Date 03-10-2016 -
Subsea 101 Well-Control Equipment and Subsea Systems for Operators
A three-day IADC-accredited course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to operator personnel, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors.
Offered to active personnel of Exploration and Production (Oil and Gas) Companies with a working knowledge of:
- Drilling
- Associated equipment
- Standards and Specifications
- Regulations
Topics Include and Covers Major OEMs:
- BOP Stack Components
- Connectors
- Subsea Gate Valves: API Test Referencing
- Ram Type BOPs and their Locking Mechanisms
- Annular Type BOPs / Wellbore Assist and Non-Wellbore Assist
- Motion Compensation (Covers Wire-line & Inline)
- BOP Control Systems
Training Classes
Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
Innovative Pioneers in Industry Training
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:
- 3D Graphics
- Animations
- Physical 3D Models
- 20’ Cyviz Bizwall
This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.
This course qualifies for our Loyalty Rewards Program.
Location Houston,Texas Event Date 03-08-2016 Event End Date 03-10-2016 -
Subsea 105 Introduction to Schematics Reading and Subsea BOP Controls
A three-day course on subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.
This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.
Prerequisites: SS 101 recommended.
Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.The following topics will be covered during the training:
- Symbols Recognition
- Understanding Hydraulic Valves
- Schematic Reading & Interpretation
- Schematic Case Studies - OEMs
- Conventional Control Systems
- Multiplex Control Systems
- Emergency Control Systems
An end of course exam administered.
Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.Training Classes
Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.
This course qualifies for our Loyalty Rewards Program.
Location Houston,Texas Event Date 3-08-2016 Event End Date 3-10-2016