Subscribe to Newsletter

Manage Events

January, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 01-05-2021
    Event End Date 01-07-2021

    Invite a Friend!

    Pre-Register

  • Subsea 108 Intervention Well Control


    An in-depth course that provides a thorough overview of intervention well-control equipment, control systems, and associated components. This course is delivered in our state-of-the-art 3D Training Center in Houston.  This course is designed for oil and gas personnel with an interste in learning more about intervention well-control equipment as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders and drilling engineers dealing with Subsea Drilling Operations involving Intervention Well Control. A review of the major OEMs is covered.

    • Objective: To provide a solid overview of IWC components and control systems
    • Duration 24 hours / 3 days
    • Continuing Ed 2.4 CEUs / 24 PDHs

    Topics Include :

    • Introduction to IWC Equipment & Background
    • IWC Architecture
    • IWC Regulations
    • BOPs vs. IWCs
    • Christmas Trees (Vertical & Horizontal)

    Training Classes
    Class Size 12 Students maximum; No Prerequisites. An end of course exam administered.
    Classes are open enrollment and group classes are available.


    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    Location Houston,Texas
    Event Date 01-12-2021
    Event End Date 01-14-2021

    Invite a Friend!

    Register Now!

February, 2021
  • Subsea 205 – Subsea Technical Skills Courses

    SubseaSolutionsTraining Subsea Solutions has developed a suite of courses designed for preparing, onboarding, and supporting growing skillsets for subsea technicians and support personnel to the drilling industry. Creation of this significant blended learning environment affords learners opportunities to choose how they learn, exercise ownership and freely communicate their voices in authentically experiencing learning for the industry.

    The courses consists of 17 modules, divided and are offered in a well thought out sequence, quarterly, ideally to be completed in 12-month cycles, from start-to-finish.

    Target Group:
    • Operator/Contractor company’s new team or group subsea technical personnel onboarding to offshore drilling industry
    • Operator/Contractor company’s existing team or group subsea technical personnel needing to grow/expand knowledgebase skillsets

    The Learning Environment:
    The course has 17 learning modules offered through Subsea Solutions own multimedia Learning Management System (LMS) platform deployed in a hybrid Blended Learning format. The modules are broken down into two parts:

    1. Subsea Technicians Skills Courses Level 1 Part 1

    Modules 1 – 4 : First (1st) Quarter; 5 Days in classroom face-to-face instruction

    Modules 5 – 7 : Second (2nd) Quarter; 5 Days in classroom face-to-face instruction

    2. Subsea Technicians Skills Courses Level 1 Part 2

    Modules 1 – 5 : Third (3rd) Quarter; 5 Days in classroom face-to-face instruction

    Modules 6 – 10: Fourth (4th) Quarter; 5 Days in classroom face-to-face instruction

    Enrolled students successfully completing the face-to-face course offering per quarter are granted credentialed access to the associated online component of course material for completion during their rotation on their MODU. The student’s MODU supervisor is granted supervisory online credentialed access, enabling monitoring/tracking of the student’s progress in completing the accompanying online material. Subsea Solutions assigned training instructor(s) administratively monitors both the student and supervisor’s course logon activities, providing assistance, facilitating scheduled forum discussions, and Q&A Parking Lot.

    Location Houston,Texas
    Event Date 02-01-2021
    Event End Date 02-05-2021

    Invite a Friend!

    Pre-Register

  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 02-02-2021
    Event End Date 02-04-2021

    Invite a Friend!

    Pre-Register

  • Subsea 104 Subsea Well-Control Math and Calculations & Subsea 105 Schematics Reading and Subsea BOP Controls

    SubseaSolutionsTraining

     

    This combined four day course is IADC accredited and walks students through an understanding of subsea math correlating with, and directly related to the operations of subsea well-control equipment. Students are assigned case scenarios for schematic reading, operations analysis, troubleshooting, and presenting findings for peer review and instructor assessment.

    Target Group: SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Open to personnel working as trainees, assistants, junior and subsea engineers, subsea inspectors, surveyors, rig electronic technicians, or any personnel dealing with subsea schematics. An end of course exam is administered.


    Group Classes | Loyalty Rewards | Continuing Education Credits

    This course is IADC-accredited. Group classes are available by request and any SUBSEA SOLUTIONS courseware can be customized to create a tailored training package.

    This course is eligible for Loyalty Rewards Points, and 1.6 CEUs/16 PDHs.

    Topics Include and Covers:

    • Metrology: Understanding and using Test and Measuring Equipment
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Riser Programs
    • Riser Tension Calculations
    • Symbols Nomenclature & Recognition
    • BOP Control Basics (Supported with in class BOP MUX simulator)
    Location  Houston, Texas
    Event Date  02-09-2021
    Event End Date  02-12-2021

    Invite a Friend!

    Register Now!

March, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 03-02-2021
    Event End Date 03-04-2021

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 03-09-2021
    Event End Date 03-11-2021

    Invite a Friend!

    Pre-Register

April, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 04-06-2021
    Event End Date 04-08-2021

    Invite a Friend!

    Pre-Register

  • Subsea 108 Intervention Well Control


    An in-depth course that provides a thorough overview of intervention well-control equipment, control systems, and associated components. This course is delivered in our state-of-the-art 3D Training Center in Houston.  This course is designed for oil and gas personnel with an interste in learning more about intervention well-control equipment as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders and drilling engineers dealing with Subsea Drilling Operations involving Intervention Well Control. A review of the major OEMs is covered.

    • Objective: To provide a solid overview of IWC components and control systems
    • Duration 24 hours / 3 days
    • Continuing Ed 2.4 CEUs / 24 PDHs

    Topics Include :

    • Introduction to IWC Equipment & Background
    • IWC Architecture
    • IWC Regulations
    • BOPs vs. IWCs
    • Christmas Trees (Vertical & Horizontal)

    Training Classes
    Class Size 12 Students maximum; No Prerequisites. An end of course exam administered.
    Classes are open enrollment and group classes are available.


    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    Location Houston,Texas
    Event Date 04-13-2021
    Event End Date 04-15-2021

    Invite a Friend!

    Register Now!

May, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 05-04-2021
    Event End Date 05-06-2021

    Invite a Friend!

    Pre-Register

  • Subsea 104 Subsea Well-Control Math and Calculations & Subsea 105 Schematics Reading and Subsea BOP Controls

    SubseaSolutionsTraining

     

    This combined four day course is IADC accredited and walks students through an understanding of subsea math correlating with, and directly related to the operations of subsea well-control equipment. Students are assigned case scenarios for schematic reading, operations analysis, troubleshooting, and presenting findings for peer review and instructor assessment.

    Target Group: SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Open to personnel working as trainees, assistants, junior and subsea engineers, subsea inspectors, surveyors, rig electronic technicians, or any personnel dealing with subsea schematics. An end of course exam is administered.


    Group Classes | Loyalty Rewards | Continuing Education Credits

    This course is IADC-accredited. Group classes are available by request and any SUBSEA SOLUTIONS courseware can be customized to create a tailored training package.

    This course is eligible for Loyalty Rewards Points, and 1.6 CEUs/16 PDHs.

    Topics Include and Covers:

    • Metrology: Understanding and using Test and Measuring Equipment
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Riser Programs
    • Riser Tension Calculations
    • Symbols Nomenclature & Recognition
    • BOP Control Basics (Supported with in class BOP MUX simulator)
    Location  Houston, Texas
    Event Date  05-11-2021
    Event End Date  05-14-2021

    Invite a Friend!

    Register Now!

June, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 06-08-2021
    Event End Date 06-10-2021

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 06-15-2021
    Event End Date 06-17-2021

    Invite a Friend!

    Pre-Register

July, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 07-13-2021
    Event End Date 07-15-2021

    Invite a Friend!

    Pre-Register

  • Subsea 108 Intervention Well Control


    An in-depth course that provides a thorough overview of intervention well-control equipment, control systems, and associated components. This course is delivered in our state-of-the-art 3D Training Center in Houston.  This course is designed for oil and gas personnel with an interste in learning more about intervention well-control equipment as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders and drilling engineers dealing with Subsea Drilling Operations involving Intervention Well Control. A review of the major OEMs is covered.

    • Objective: To provide a solid overview of IWC components and control systems
    • Duration 24 hours / 3 days
    • Continuing Ed 2.4 CEUs / 24 PDHs

    Topics Include :

    • Introduction to IWC Equipment & Background
    • IWC Architecture
    • IWC Regulations
    • BOPs vs. IWCs
    • Christmas Trees (Vertical & Horizontal)

    Training Classes
    Class Size 12 Students maximum; No Prerequisites. An end of course exam administered.
    Classes are open enrollment and group classes are available.


    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    Location Houston,Texas
    Event Date 07-20-2021
    Event End Date 07-22-2021

    Invite a Friend!

    Register Now!

August, 2021
  • Subsea 205 – Subsea Technical Skills Courses

    SubseaSolutionsTraining Subsea Solutions has developed a suite of courses designed for preparing, onboarding, and supporting growing skillsets for subsea technicians and support personnel to the drilling industry. Creation of this significant blended learning environment affords learners opportunities to choose how they learn, exercise ownership and freely communicate their voices in authentically experiencing learning for the industry.

    The courses consists of 17 modules, divided and are offered in a well thought out sequence, quarterly, ideally to be completed in 12-month cycles, from start-to-finish.

    Target Group:
    • Operator/Contractor company’s new team or group subsea technical personnel onboarding to offshore drilling industry
    • Operator/Contractor company’s existing team or group subsea technical personnel needing to grow/expand knowledgebase skillsets

    The Learning Environment:
    The course has 17 learning modules offered through Subsea Solutions own multimedia Learning Management System (LMS) platform deployed in a hybrid Blended Learning format. The modules are broken down into two parts:

    1. Subsea Technicians Skills Courses Level 1 Part 1

    Modules 1 – 4 : First (1st) Quarter; 5 Days in classroom face-to-face instruction

    Modules 5 – 7 : Second (2nd) Quarter; 5 Days in classroom face-to-face instruction

    2. Subsea Technicians Skills Courses Level 1 Part 2

    Modules 1 – 5 : Third (3rd) Quarter; 5 Days in classroom face-to-face instruction

    Modules 6 – 10: Fourth (4th) Quarter; 5 Days in classroom face-to-face instruction

    Enrolled students successfully completing the face-to-face course offering per quarter are granted credentialed access to the associated online component of course material for completion during their rotation on their MODU. The student’s MODU supervisor is granted supervisory online credentialed access, enabling monitoring/tracking of the student’s progress in completing the accompanying online material. Subsea Solutions assigned training instructor(s) administratively monitors both the student and supervisor’s course logon activities, providing assistance, facilitating scheduled forum discussions, and Q&A Parking Lot.

    Location Houston,Texas
    Event Date 08-02-2021
    Event End Date 08-06-2021

    Invite a Friend!

    Pre-Register

  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 08-03-2021
    Event End Date 08-05-2021

    Invite a Friend!

    Pre-Register

  • Subsea 104 Subsea Well-Control Math and Calculations & Subsea 105 Schematics Reading and Subsea BOP Controls

    SubseaSolutionsTraining

     

    This combined four day course is IADC accredited and walks students through an understanding of subsea math correlating with, and directly related to the operations of subsea well-control equipment. Students are assigned case scenarios for schematic reading, operations analysis, troubleshooting, and presenting findings for peer review and instructor assessment.

    Target Group: SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Open to personnel working as trainees, assistants, junior and subsea engineers, subsea inspectors, surveyors, rig electronic technicians, or any personnel dealing with subsea schematics. An end of course exam is administered.


    Group Classes | Loyalty Rewards | Continuing Education Credits

    This course is IADC-accredited. Group classes are available by request and any SUBSEA SOLUTIONS courseware can be customized to create a tailored training package.

    This course is eligible for Loyalty Rewards Points, and 1.6 CEUs/16 PDHs.

    Topics Include and Covers:

    • Metrology: Understanding and using Test and Measuring Equipment
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Riser Programs
    • Riser Tension Calculations
    • Symbols Nomenclature & Recognition
    • BOP Control Basics (Supported with in class BOP MUX simulator)
    Location  Houston, Texas
    Event Date  08-10-2021
    Event End Date  08-13-2021

    Invite a Friend!

    Register Now!

September, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 09-14-2021
    Event End Date 09-16-2021

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 09-21-2021
    Event End Date 09-23-2021

    Invite a Friend!

    Pre-Register

October, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 10-05-021
    Event End Date 10-07-2021

    Invite a Friend!

    Pre-Register

  • Subsea 108 Intervention Well Control


    An in-depth course that provides a thorough overview of intervention well-control equipment, control systems, and associated components. This course is delivered in our state-of-the-art 3D Training Center in Houston.  This course is designed for oil and gas personnel with an interste in learning more about intervention well-control equipment as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders and drilling engineers dealing with Subsea Drilling Operations involving Intervention Well Control. A review of the major OEMs is covered.

    • Objective: To provide a solid overview of IWC components and control systems
    • Duration 24 hours / 3 days
    • Continuing Ed 2.4 CEUs / 24 PDHs

    Topics Include :

    • Introduction to IWC Equipment & Background
    • IWC Architecture
    • IWC Regulations
    • BOPs vs. IWCs
    • Christmas Trees (Vertical & Horizontal)

    Training Classes
    Class Size 12 Students maximum; No Prerequisites. An end of course exam administered.
    Classes are open enrollment and group classes are available.


    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    Location Houston,Texas
    Event Date 10-12-2021
    Event End Date 10-14-2021

    Invite a Friend!

    Register Now!

November, 2021
  • Subsea 205 – Subsea Technical Skills Courses

    SubseaSolutionsTraining Subsea Solutions has developed a suite of courses designed for preparing, onboarding, and supporting growing skillsets for subsea technicians and support personnel to the drilling industry. Creation of this significant blended learning environment affords learners opportunities to choose how they learn, exercise ownership and freely communicate their voices in authentically experiencing learning for the industry.

    The courses consists of 17 modules, divided and are offered in a well thought out sequence, quarterly, ideally to be completed in 12-month cycles, from start-to-finish.

    Target Group:
    • Operator/Contractor company’s new team or group subsea technical personnel onboarding to offshore drilling industry
    • Operator/Contractor company’s existing team or group subsea technical personnel needing to grow/expand knowledgebase skillsets

    The Learning Environment:
    The course has 17 learning modules offered through Subsea Solutions own multimedia Learning Management System (LMS) platform deployed in a hybrid Blended Learning format. The modules are broken down into two parts:

    1. Subsea Technicians Skills Courses Level 1 Part 1

    Modules 1 – 4 : First (1st) Quarter; 5 Days in classroom face-to-face instruction

    Modules 5 – 7 : Second (2nd) Quarter; 5 Days in classroom face-to-face instruction

    2. Subsea Technicians Skills Courses Level 1 Part 2

    Modules 1 – 5 : Third (3rd) Quarter; 5 Days in classroom face-to-face instruction

    Modules 6 – 10: Fourth (4th) Quarter; 5 Days in classroom face-to-face instruction

    Enrolled students successfully completing the face-to-face course offering per quarter are granted credentialed access to the associated online component of course material for completion during their rotation on their MODU. The student’s MODU supervisor is granted supervisory online credentialed access, enabling monitoring/tracking of the student’s progress in completing the accompanying online material. Subsea Solutions assigned training instructor(s) administratively monitors both the student and supervisor’s course logon activities, providing assistance, facilitating scheduled forum discussions, and Q&A Parking Lot.

    Location Houston,Texas
    Event Date 11-081-2021
    Event End Date 11-12-2021

    Invite a Friend!

    Pre-Register

  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 11-09-021
    Event End Date 11-11-2021

    Invite a Friend!

    Pre-Register

  • Subsea 104 Subsea Well-Control Math and Calculations & Subsea 105 Schematics Reading and Subsea BOP Controls

    SubseaSolutionsTraining

     

    This combined four day course is IADC accredited and walks students through an understanding of subsea math correlating with, and directly related to the operations of subsea well-control equipment. Students are assigned case scenarios for schematic reading, operations analysis, troubleshooting, and presenting findings for peer review and instructor assessment.

    Target Group: SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Open to personnel working as trainees, assistants, junior and subsea engineers, subsea inspectors, surveyors, rig electronic technicians, or any personnel dealing with subsea schematics. An end of course exam is administered.


    Group Classes | Loyalty Rewards | Continuing Education Credits

    This course is IADC-accredited. Group classes are available by request and any SUBSEA SOLUTIONS courseware can be customized to create a tailored training package.

    This course is eligible for Loyalty Rewards Points, and 1.6 CEUs/16 PDHs.

    Topics Include and Covers:

    • Metrology: Understanding and using Test and Measuring Equipment
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Riser Programs
    • Riser Tension Calculations
    • Symbols Nomenclature & Recognition
    • BOP Control Basics (Supported with in class BOP MUX simulator)
    Location  Houston, Texas
    Event Date  11-160-2021
    Event End Date  11-19-2021

    Invite a Friend!

    Register Now!

December, 2021
  • Subsea 101- Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day IADC accredited course on subsea well-control equipment and systems. Covers the operations functionality of the current major OEMs’ BOP components and control systems; clearly articulates the knowledge needed to effective perform maintenance, inspections for regulatory compliance and requirements. This course intentionally promotes and enhances the relationship between operators and drilling contractors. 

    Target Group:
    SUBSEA SOLUTIONS state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Physical 3D Models
    • Animations
    • 20’ Cyviz Bizwall

    Designed for drilling engineers, subsea director, subsea supervisor, subsea technicians, subsea trainee, purchasing agents and buyers, safety personnel, employees in a leadership development program, and engineers looking for professional development hours and continuing education credits.Topics Include and Covers OEMs:

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 12-07-021
    Event End Date 12-09-2021

    Invite a Friend!

    Pre-Register

  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 12-14-2021
    Event End Date 12-16-2021

    Invite a Friend!

    Pre-Register

Memberships/Affiliations

  • Society of Petroleum Engineers
  • American Petroleum Institute
  • International Association of Drilling Contractors (IADC)
  • Accredited IADC Courses and Training Provider (DIT)
  • ISO 45001:2018 Certified
  • ISNetworld

UKAS OHSAS LOGO 2

Follow Us

Follow Us on RigZone
FacebookTwitterLinkedinYoutube