Subscribe to Newsletter

Texas Courses

Training-Houston
December 12, 2017
  • OPERATOR: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

    Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited
    • API Standards and Specifications
    • BSEE Regulations

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Subsea Gate Valves: API Test Referencing
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
    • Motion Compensation (Covers Wire-line & Inline)
    • BOP Control Systems 

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 12-12-2017
    Event End Date 12-14-2017

    Invite a Friend!

    Pre-Register

December 19, 2017
  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designed for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 12-19-2017
    Event End Date 12-21-2017

    Invite a Friend!

    Pre-Register

January 09, 2018
  • DRILLING CONTRACTOR: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

    Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs
    • Motion Compensation(Covers Wire-line & Inline)
    • BOP Control Systems
    • POD Similarities and Differences

    Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

    Location Houston,Texas
    Event Date 01-09-2018
    Event End Date 01-11-2018

    Invite a Friend!

    Pre-Register

January 16, 2018
  • OPERATOR: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

    Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited
    • API Standards and Specifications
    • BSEE Regulations

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Subsea Gate Valves: API Test Referencing
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
    • Motion Compensation (Covers Wire-line & Inline)
    • BOP Control Systems 

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 01-16-2018
    Event End Date 01-18-2018

    Invite a Friend!

    Pre-Register

January 23, 2018
  • Subsea 108 Introduction to Well Intervention Control Systems

    SubseaSolutionsTraining

    A three-day course providing a solid overview of intervention well control components and control systems. Recommended Prerequisite: Subsea 101  / Subsea 102 and / or some electronics-electrical background. This course is designed for oil and gas personnel involved with intervention well control.

    Course includes relevant students’ hands-on in class group exercises and activities.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • Intervention Well Control Manufacturers - OEMs
    • Intervention Well Control Systems Components
    • Intervention Well Control Recommended Procedures
    • Christmas Trees - Vertical and Horizontal
    • BOPs vs. IWCs - Control Systems
    • ROV Tooling

     Training Classes
    Classes are open to current employees of oil and gas companies and drilling contractors and original equipment manufacturers of intervention well control systems. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 01-23-2018
    Event End Date 01-25-2018

    Invite a Friend!

    Pre-Register

February 06, 2018
  • DRILLING CONTRACTOR: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

    Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs
    • Motion Compensation(Covers Wire-line & Inline)
    • BOP Control Systems
    • POD Similarities and Differences

    Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

    Location Houston,Texas
    Event Date 02-06-2018
    Event End Date 02-08-2018

    Invite a Friend!

    Pre-Register

February 13, 2018
  • OPERATOR: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

    Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited
    • API Standards and Specifications
    • BSEE Regulations

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Subsea Gate Valves: API Test Referencing
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
    • Motion Compensation (Covers Wire-line & Inline)
    • BOP Control Systems 

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 02-13-2018
    Event End Date 02-15-2018

    Invite a Friend!

    Pre-Register

February 20, 2018
  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designe for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 02-20-2018
    Event End Date 02-22-2018

    Invite a Friend!

    Pre-Register

March 06, 2018
  • DRILLING CONTRACTOR:  Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

    Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs
    • Motion Compensation(Covers Wire-line & Inline)
    • BOP Control Systems
    • POD Similarities and Differences

    Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

    Location Houston,Texas
    Event Date 03-06-2018
    Event End Date 03-08-2018

    Invite a Friend!

    Pre-Register

March 13, 2018
  • OPERATORS: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

    Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited
    • API Standards and Specifications
    • BSEE Regulations

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Subsea Gate Valves: API Test Referencing
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
    • Motion Compensation (Covers Wire-line & Inline)
    • BOP Control Systems 

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 03-13-2018
    Event End Date 03-15-2018

    Invite a Friend!

    Pre-Register

  • Subsea 108 Introduction to Well Intervention Control Systems

    SubseaSolutionsTraining

    A three-day course providing a solid overview of intervention well control components and control systems. Recommended Prerequisite: Subsea 101 / Subsea 102 and / or some electronics-electrical background. This course is designed for oil and gas personnel involved with intervention well control.

    Course includes relevant students’ hands-on in class group exercises and activities.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • Intervention Well Control Manufacturers - OEMs
    • Intervention Well Control Systems Components
    • Intervention Well Control Recommended Procedures
    • Christmas Trees - Vertical and Horizontal
    • BOPs vs. IWCs - Control Systems
    • ROV Tooling

     Training Classes
    Classes are open to current employees of oil and gas companies and drilling contractors and original equipment manufacturers of intervention well control systems. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 03-13-2018
    Event End Date 03-15-2018

    Invite a Friend!

    Pre-Register

March 20, 2018
  • Introduction to Subsea Math and Schematics and Subsea BOP Controls

    SubseaSolutionsTraining

    This is a combined four-day course on subsea math and subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.

    This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.

    Recommended Prerequisites: Subsea 101 for Drilling Contractors and Operators is recommended.

    Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

    The following topics will be covered during the training:

    • Symbols Recognition
    • Understanding and using Test and Measuring Equipment
    • Understanding Hydraulic Valves
    • Schematic Reading & Interpretation
    • Schematic Case Studies - OEMs
    • Conventional Control Systems
    • Multiplex Control Systems
    • Emergency Control Systems
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Risers and Riser Tension Calculations
    An end of course exam administered.

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.

    Training Classes

    Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This course qualifies for our Loyalty Rewards Program.

    Location Houston,Texas
    Event Date 3-20-2018
    Event End Date 3-23-2018

    Invite a Friend!

    Register Now!

April 03, 2018
  • DRILLING CONTRACTOR: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

    Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs
    • Motion Compensation(Covers Wire-line & Inline)
    • BOP Control Systems
    • POD Similarities and Differences

    Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

    Location Houston,Texas
    Event Date 04-03-2018
    Event End Date 04-05-2018

    Invite a Friend!

    Pre-Register

April 10, 2018
  • OPERATORS: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

    Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited
    • API Standards and Specifications
    • BSEE Regulations

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Subsea Gate Valves: API Test Referencing
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
    • Motion Compensation (Covers Wire-line & Inline)
    • BOP Control Systems 

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 04-10-2018
    Event End Date 04-12-2018

    Invite a Friend!

    Pre-Register

April 17, 2018
  • Subsea 102 BOP MUX CONTROL SYSTEMS for Contractors and Operators

    SubseaSolutionsTraining

    A three-day IADC-accredited course that provides a solid comparison and contrast overview of systems, tracking the electrical-hydraulic signal logic and fluid flow sequences from initiation at the remote panel to stack end device actuations. Recommended Prerequisite: Subsea 101 and some electronics-electrical background. This course is designe for oil and gas personnel working as drilling engineers, maintenance supervisors, subsea trainees, subsea directors, subsea engineers, and any personnel with electronics experience, and any auxiliary personnel.

    Course includes relevant students’ hands-on in class group exercises and activities with Subsea Solutions' BOP MUX Simulator.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • BOP Control Systems:Multiplex (4 , 5 , & 6 Generation)
    • Anatomy of Mux Systems
    • Hydraulic Power Package
    • MUX Cable and Reels
    • Remote Control Panels (NEC, IEC, CENELEC Specifications)
    • Programmable Logic Controllers - PLCs

     Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 04-17-2018
    Event End Date 04-19-2018

    Invite a Friend!

    Pre-Register

May 08, 2018
  • DRILLING CONTRACTOR: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

    Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs
    • Motion Compensation(Covers Wire-line & Inline)
    • BOP Control Systems
    • POD Similarities and Differences

    Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

    Location Houston,Texas
    Event Date 05-08-2018
    Event End Date 05-10-2018

    Invite a Friend!

    Pre-Register

May 15, 2018
  • OPERATORS: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

    Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited
    • API Standards and Specifications
    • BSEE Regulations

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Subsea Gate Valves: API Test Referencing
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
    • Motion Compensation (Covers Wire-line & Inline)
    • BOP Control Systems 

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 05-15-2018
    Event End Date 05-17-2018

    Invite a Friend!

    Pre-Register

May 22, 2018
  • Subsea 108 Introduction to Well Intervention Control Systems

    SubseaSolutionsTraining

    A three-day course providing a solid overview of intervention well control components and control systems. Recommended Prerequisite: Subsea 101 / Subsea 102 and / or some electronics-electrical background. This course is designed for oil and gas personnel involved with intervention well control.

    Course includes relevant students’ hands-on in class group exercises and activities.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24

    Topics Include and Covers Major OEMs:

    • Intervention Well Control Manufacturers - OEMs
    • Intervention Well Control Systems Components
    • Intervention Well Control Recommended Procedures
    • Christmas Trees - Vertical and Horizontal
    • BOPs vs. IWCs - Control Systems
    • ROV Tooling

     Training Classes
    Classes are open to current employees of oil and gas companies and drilling contractors and original equipment manufacturers of intervention well control systems. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training
    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Rewards points.

    Location Houston,Texas
    Event Date 05-22-2018
    Event End Date 05-24-2018

    Invite a Friend!

    Pre-Register

June 05, 2018
  • DRILLING CONTRACTOR: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    Designed specifically for drilling contractor personnel, this three-day course provides a solid practical operations overview of blowout preventer components and control systems and an in-depth review of the various original equipment manufacturers. Improve skills and gain in-depth knowledge to perform safe operations on offshore drilling rigs.

    Target Group: Drilling Contractor Personnel, Drilling Engineers, Subsea Supervisors, Subsea Technicians, Subsea Trainees, Subsea Electronics Technicians

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs
    • Motion Compensation(Covers Wire-line & Inline)
    • BOP Control Systems
    • POD Similarities and Differences

    Training Classes
    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing the use of:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more details.

    Location Houston,Texas
    Event Date 06-05-2018
    Event End Date 06-07-2018

    Invite a Friend!

    Pre-Register

June 12, 2018
  • OPERATORS: Well-Control Equipment and Subsea Systems

    SubseaSolutionsTraining

    A three-day course on well-control equipment and subsea systems, covering BOP components and control systems. Tailored to employees of oil and gas operators, this course addresses the concerns and issues personnel experience when looking to resolve the theoretical operations of the equipment. This course strives to promote and enhance the relationship between operators and drilling contractors. Where applicable, this course covers recent case studies, safety bulletins and OEM product updates and alerts.

    Target Group: Operator personnel that include drilling engineers, subsea supervisors, subsea technicians, subsea trainees, subsea electronics technicians.

    • Continuing Education Units (CEU)  2.4 / Professional Development Hours (PDH) 24
    • IADC Accredited
    • API Standards and Specifications
    • BSEE Regulations

    Topics Include and Covers OEMs:

    • BOP Stack Components
    • Connectors
    • Subsea Gate Valves: API Test Referencing
    • Ram Type BOPs and their Locking Mechanisms
    • Annular Type BOPs / Wellbore Assist vs. Non-Wellbore Assist
    • Motion Compensation (Covers Wire-line & Inline)
    • BOP Control Systems 

    Training Classes

    Classes are IADC accredited and open to current employees of oil and gas companies and drilling contractors. Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    Innovative Pioneers in Industry Training

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing:

    • 3D Graphics
    • Animations
    • Physical 3D Models
    • 20’ Cyviz Bizwall

    This stimulating learning experience is designed to capture the students interest and allow for maximum retention of the material presented.

    This course qualifies for Loyalty Reward points. Ask our Training Coordinator for more information.

    Location Houston,Texas
    Event Date 06-12-2018
    Event End Date 06-14-2018

    Invite a Friend!

    Pre-Register

June 19, 2018
  • Introduction to Subsea Math and Schematics and Subsea BOP Controls

    SubseaSolutionsTraining

    This is a combined four-day course on subsea math and subsea schematics and interpretation of subsea schematic diagrams related to BOP stack operations for enhanced and effective troubleshooting and maintenance skills.

    This course is open to subsea personnel working as trainees, assistant subsea and subsea engineers, drilling superintendents, well site leaders, and drilling engineers dealing with subsea drilling operations.

    Recommended Prerequisites: Subsea 101 for Drilling Contractors and Operators is recommended.

    Objective: To provide students the knowledge base and intuitive skill sets needed to understand and interpret schematic diagrams accurately; through visual animated graphic presentations, hands-on lab exercises, and correlation with relevant real world OEM BOP stack and associated control systems.

    The following topics will be covered during the training:

    • Symbols Recognition
    • Understanding and using Test and Measuring Equipment
    • Understanding Hydraulic Valves
    • Schematic Reading & Interpretation
    • Schematic Case Studies - OEMs
    • Conventional Control Systems
    • Multiplex Control Systems
    • Emergency Control Systems
    • The Impact of Hydrostatic Pressure
    • Determining Accumulator Volumes
    • Risers and Riser Tension Calculations
    An end of course exam administered.

    Subsea Solutions state-of-the-art training center offers a multi-sensory approach to learning by utilizing 3D graphics, 3D models and animations.

    Training Classes

    Group classes are available by request and any Subsea Solutions courseware can be customized to create a tailored training package.

    This course qualifies for our Loyalty Rewards Program.

    Location Houston,Texas
    Event Date 06-19-2018
    Event End Date 06-22-2018

    Invite a Friend!

    Register Now!




Affiliations

  • Members of Society of Petroleum Engineers (SPE)
  • Members of American Petroleum Institute (API)
  • Members of Oil and Gas UK
  • Members of International Well Control Forum (IWCF)
  • Members of International Association of Drilling Contractors (IADC)
  • Accredited IADC Courses and Training Provider (DIT)
  • OHSAS 18001:2007 Certified
  • ISO 9001:2015 Certified
  • Member of ISNetworld
  • Member of PEC Safety
  • Members of Achilles FPAL UK

 

Subsea Solutions NEW 2015 ANAB WCS 18001 500UKAS OHSAS LOGO 2

Trade Shows and Events

  • API Exploration & Production Standards Meetings 2018
  • Offshore Technology Conference, Houston, April 30 - May 3 2018
  • Deepwater Intervention Forum, Galveston, August 7 - 9 2018
  • IADC Well Control Conference of the Americas, Galveston, August 2018
  • Oil and Gas UK ShareFair, Aberdeen, November 2018